{"model":"mk2","model_name":"MK2 Supra","vehicle":"Toyota Supra A60 (1982–1986, 5M-GE)","document":"Electrical Wiring Diagram","section":"S14","section_name":"Front Wiper and Washer","page":2,"pages_in_section":2,"title":"Front Wiper and Washer S/W (Comb. S/W)","section_header":"Front Wiper and Washer S/W (Comb. S/W)","ocr_text":"FRONT WIPER AND WASHER S/W (COMB. S/W)\n① 3- ② 5: APPROX. 50KΩ(SLOW)\nAPPROX. 34KΩ(SLOW)\nAPPROX. 18KΩ(SLOW)\nAPPROX. 0KΩ(FAST)\nWIPER MOTOR\n① 4- ② 1: 12 VOLTS WITH IGNITION S/W ON AND WIPER S/W OFF UNTIL MOTOR STOPS\n(HIDE-DOWN POSITION.CAM SOLENOID ON)\n① 4- ② 2: CLOSED UNLESS MOTOR AT HIDE-DOWN POSITION\n(WIPER S/W OFF POSITION)\n① 4- ② 3: CLOSED UNLESS MOTOR AT RISE-UP POSITION\n(WIPER S/W INT POSITION)\n⑥ WIPER RELAY\n13-GROUND: 12 VOLTS WITH IGNITION S/W ON AND WIPER S/W AT LOW POSITION (6-13: CLOSED)\n5-GROUND: 12 VOLTS WITH IGNITION S/W ON AND WIPER S/W OFF UNTIL WIPER MOTOR STOPS\n13-GROUND: 12 VOLTS WITH IGNITION S/W ON AND AFTER WIPER S/W OFF UNTIL WIPER MOTOR\nSTOPS (12-13: CLOSED)\n9-GROUND: CONTINUITY WITH WIPER S/W AT OFF POSITION(9-7: CLOSED.CAM SOLENOID GROUND)\n13-GROUND: 12 VOLTS 2.2~12.7SECONDS INTERMITTENTLY WITH IGNITION S/W ON AND WIPER S/W\nAT INT POSITION (12-13:CLOSED FOR 1.2 SECONDS AFTER WIPER MOTOR STARTS AT FIRST\nSTROKE AND FOR 0.7SECONDS FROM SECOND STROKE.) (6-13: CLOSED 1.2SECONDS\nAFTER MOTOR STARTS UNTIL MOTOR STOPS AT FIRST STROKE AND 0.7SECONDS FROM\nSECOND STROKE.)\n13-GROUND: 12 VOLTS WITH IGNITION S/W AND WASHER S/W ON AND FOR 3.7SECONDS AFTER\nWASHER S/W OFF (12-13: CLOSED)\n9-GROUND: NO CONTINUITY WITH IGNITION S/W ON AND WASHER S/W ON AND FOR 3.7SECONDS\nAFTER WASHER S/W OFF EVEN IF WIPER S/W AT OFF POSITION (9-7: OPEN.CAM\nSOLENOID GROUND CUT)\n\nWIPER RELAY\nL 12\nP-W 1\nP-W 3\nP-B 2\nLG 5\nL-Y 4\nL-R 6\nW 7\nW-R 11\nW-G 9\nL-B 13\nW-B 10\n\n13\nJUNCTION\nCONNECTOR\n12\nW-B\n2 J4\nRIGHT\nKICK PANEL\n\n① BLACK ② BLUE ③\n④ ⑤ ⑥\nConnector diagrams showing pin layouts:\n①: 3 pins (1,2,3)\n⑤BLACK: 6 pins (1,2,3,4,5,6 with 9,7,6,8 on bottom)\n②BLUE: 2 pins (1,2)\n③: 4 pins (1,2,3,4)\n④: 3 pins (1,2,3)\n⑥: 6 pins (1,2,3,4,5,6 with 7,8,9,10,11,12,13)\n⑥B: connector diagram\n⑥C: 2 pins\n⑥A YELLOW: connector with pin 8\n(JUNCTION CONNECTOR) J1: pins 2,7 and 8,9,14\nJ2: connector diagram\n(JUNCTION CONNECTOR) J3: pins 1,2,8,9,12,13\nJ1: 2-pin connectors\nJ4: 2-pin connectors\n\n-43-","image":"https://tsrm.sasquatchvc.com/images/mk2-ewd/S14/S14_002.png","url":"https://tsrm.sasquatchvc.com/mk2/ewd/S14/2","prev":{"page":1,"url":"https://tsrm.sasquatchvc.com/mk2/ewd/S14/1","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/ewd/S14/1"},"next":null,"section_url":"https://tsrm.sasquatchvc.com/mk2/ewd/S14","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk2/ewd/S14/1","https://tsrm.sasquatchvc.com/api/pages/mk2/ewd/S14/2"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}