{"model":"mk2","model_name":"MK2 Supra","vehicle":"Toyota Supra A60 (1982–1986, 5M-GE)","document":"Repair Manual","section":"CH","section_name":"Charging System","page":3,"pages_in_section":11,"title":"Charging System","section_header":"Charging System — On-Vehicle Inspection","ocr_text":"3. INSPECT DRIVE BELT\n(a) Visually check the belt for separation of the adhesive rubber, rubber missing from the core, core separating from the belt side, severed core, separation of the rib from the adhesive rubber, cracking or separation of the rib, torn or worn ribs or cracks in the inner ridges of the ribs.\nIf necessary, replace the drive belt.\n\n(b) Using a belt tension gauge, check the drive belt tension.\nBelt tension gauge:\nNippondenso BTG-20 (95606-00020) or\nBorroughs No. BT-33-73F\nDrive belt tension:\nNew belt 170 ± 10 lb\nUsed belt 135 ± 20 lb\nIf necessary, adjust the drive belt tension.\nNOTE:\n• \"New belt\" refers to a belt which has been used less than 5 minutes on a running engine.\n• \"Used belt\" refers to a belt which has been used on a running engine for 5 minutes or more.\n• After installing the drive belt, check that it fits properly in the ribbed grooves.\n• Check by hand to confirm that the belt has not slipped out of the groove on the bottom of the crank pulley.\n• After installing the belt, run the engine for about 5 minutes and then recheck the tension.\n\n4. CHECK FUSES FOR CONTINUITY\nENGINE fuse (15A)\nCHARGE fuse (7.5A)\nIGN fuse (7.5A)\n\n5. VISUALLY CHECK ALTERNATOR WIRING AND LISTEN FOR ABNORMAL NOISES\n(a) Check that the wiring is in good condition.\n(b) Check that there is no abnormal noise from the alternator while the engine is running.\n\n6. CHECK DISCHARGE WARNING LIGHT CIRCUIT\n(a) Warm up the engine and then turn it off.\n(b) Turn off all accessories.\n(c) Turn the ignition switch to ON. Check that the discharge warning light is lit.\n(d) Start the engine. Check that the light goes out.\nIf the light does not come on and go off as specified, troubleshoot the warning light circuit.","image":"https://tsrm.sasquatchvc.com/images/mk2/CH/CH_003.png","url":"https://tsrm.sasquatchvc.com/mk2/tsrm/CH/3","prev":{"page":2,"url":"https://tsrm.sasquatchvc.com/mk2/tsrm/CH/2","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/2"},"next":{"page":4,"url":"https://tsrm.sasquatchvc.com/mk2/tsrm/CH/4","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/4"},"section_url":"https://tsrm.sasquatchvc.com/mk2/tsrm/CH","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/1","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/2","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/3","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/4","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/5","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/6","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/7","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/8","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/9","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/10","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CH/11"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}