{"model":"mk2","model_name":"MK2 Supra","vehicle":"Toyota Supra A60 (1982–1986, 5M-GE)","document":"Repair Manual","section":"CL","section_name":"Clutch","page":10,"pages_in_section":11,"title":"Clutch","section_header":"Clutch — Clutch Unit","ocr_text":"CL-10\n\nCLUTCH — Clutch Unit\n\n9. IF NECESSARY, REPLACE RELEASE BEARING\n(a) Using a press and SST, press the release bearing from the hub.\nSST 09315-00010\n\n(b) Using a press and SST, press a new release bearing into the hub.\nSST 09315-00010\n(c) After installing the bearing, check that there is no drag on the bearing when it is turned under pressure.\n\nINSTALLATION OF CLUTCH UNIT\n(See page CL-7)\n\n1. INSTALL DISC ON FLYWHEEL\nUsing SST, install the disc on the flywheel.\nSST 09301-20020\n\n2. INSTALL CLUTCH COVER\nTighten the bolts evenly and gradually. Make several passes around the cover until the cover is snug. Torque the bolts.\nTorque: 185 kg·cm (13 ft·lb, 18 N·m)\n\n3. CHECK DIAPHRAGM SPRING TIP ALIGNMENT\nUsing a feeler gauge and SST, measure the gap between the spring tips and the tool.\nSST 09302-30031\nMaximum gap: 0.5 mm (0.020 in.)\nIf gap is excessive, adjust as follows.","image":"https://tsrm.sasquatchvc.com/images/mk2/CL/CL_010.png","url":"https://tsrm.sasquatchvc.com/mk2/tsrm/CL/10","prev":{"page":9,"url":"https://tsrm.sasquatchvc.com/mk2/tsrm/CL/9","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/9"},"next":{"page":11,"url":"https://tsrm.sasquatchvc.com/mk2/tsrm/CL/11","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/11"},"section_url":"https://tsrm.sasquatchvc.com/mk2/tsrm/CL","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/1","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/2","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/3","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/4","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/5","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/6","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/7","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/8","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/9","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/10","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/11"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}