{"model":"mk2","model_name":"MK2 Supra","vehicle":"Toyota Supra A60 (1982–1986, 5M-GE)","document":"Repair Manual","section":"CL","section_name":"Clutch","page":11,"pages_in_section":11,"title":"Clutch","section_header":"Clutch — Clutch Unit","ocr_text":"4. IF NECESSARY, ADJUST SPRINGS\nUsing SST, bend the springs until alignment is correct.\nSST 09333-00012\n\n5. APPLY MOLYBDENUM DISULPHIDE LITHIUM BASE GREASE (NLGI NO.2) OR MP GREASE\n(a) Apply molybdenum disulphide lithium base grease to the following parts:\n• Release fork and hub contact point\n• Release fork and push rod contact point\n• Release fork pivot point\n• Clutch disc spline\n• Release bearing hub inside groove\n\n(b) Apply MP grease to the front of the release bearing.\n\n6. INSTALL BOOT, FORK, HUB AND BEARING ON TRANSMISSION\n\n7. INSTALL TRANSMISSION (See pages MT-23, 24)","image":"https://tsrm.sasquatchvc.com/images/mk2/CL/CL_011.png","url":"https://tsrm.sasquatchvc.com/mk2/tsrm/CL/11","prev":{"page":10,"url":"https://tsrm.sasquatchvc.com/mk2/tsrm/CL/10","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/10"},"next":null,"section_url":"https://tsrm.sasquatchvc.com/mk2/tsrm/CL","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/1","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/2","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/3","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/4","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/5","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/6","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/7","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/8","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/9","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/10","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/CL/11"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}