{"model":"mk2","model_name":"MK2 Supra","vehicle":"Toyota Supra A60 (1982–1986, 5M-GE)","document":"Repair Manual","section":"FA","section_name":"Front Axle And Suspension","page":3,"pages_in_section":19,"title":"Front Wheel Alignment","section_header":"Front Axle and Suspension — Front Wheel Alignment","ocr_text":"FRONT WHEEL ALIGNMENT\n\n1. MAKE FOLLOWING CHECKS AND CORRECT ANY PROBLEMS\n\n(a) Check the tires for wear and proper inflation.\nCold tire inflation pressure: 1.9 kg/cm² (27 psi, 186 kPa)\n\n(b) Check the wheel runout.\nLateral runout: Less than 1.0 mm (0.039 in.)\n\n(c) Check the front wheel bearings for looseness.\n\n(d) Check the front suspension for looseness.\n\n(e) Check the steering linkage for looseness.\n\n(f) Check that the front absorbers work properly by using the standard bounce test.\n\n2. MEASURE VEHICLE HEIGHT\nVehicle height\n\nmm (in.)\n\nTire size | Front A | Rear B\n225/60 HR14 | 223.0 (8.780) | 263.0 (10.354)\n\nIf height of the vehicle is not as specified, try to level the vehicle by shaking it down. If the height is still not correct, check for bad springs and worn or loose suspension parts.\n\n3. INSTALL WHEEL ALIGNMENT EQUIPMENT\nFollow the specific instructions of the equipment manufacturer.","image":"https://tsrm.sasquatchvc.com/images/mk2/FA/FA_003.png","url":"https://tsrm.sasquatchvc.com/mk2/tsrm/FA/3","prev":{"page":2,"url":"https://tsrm.sasquatchvc.com/mk2/tsrm/FA/2","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/2"},"next":{"page":4,"url":"https://tsrm.sasquatchvc.com/mk2/tsrm/FA/4","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/4"},"section_url":"https://tsrm.sasquatchvc.com/mk2/tsrm/FA","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/1","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/2","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/3","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/4","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/5","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/6","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/7","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/8","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/9","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/10","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/11","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/12","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/13","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/14","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/15","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/16","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/17","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/18","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/FA/19"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}