{"model":"mk2","model_name":"MK2 Supra","vehicle":"Toyota Supra A60 (1982–1986, 5M-GE)","document":"Repair Manual","section":"LU","section_name":"Lubrication System","page":8,"pages_in_section":9,"title":"Lubrication System","section_header":"Lubrication System — Oil Pump","ocr_text":"4. INSTALL EXHAUST PIPE CLAMP BOLT TO PIPE STAY\n\n5. INSTALL TWO STIFFENER PLATES\n\n6. INSTALL ENGINE UNDER COVER\n\n7. INSTALL FAN AND FAN SHROUD\n(a) Put on the fan shroud together the fluid coupling to the engine compartment.\n(b) Install the fluid coupling on the pulley with four nuts.\n(c) Install the four fan shroud bolts.\n\n8. ADJUST FAN BELT TENSION\n(See page MA-4)\n\n9. CONNECT UPPER RADIATOR HOSE\n\n10. INSTALL AIR CONNECTOR PIPE WITH NO.1 AND NO.2 AIR CLEANER HOSES\n\n11. INSTALL AIR CLEANER CASE\n\n12. FILL WITH COOLANT\n\n13. FILL WITH ENGINE OIL\n\n14. START ENGINE AND CHECK FOR LEAKS","image":"https://tsrm.sasquatchvc.com/images/mk2/LU/LU_008.png","url":"https://tsrm.sasquatchvc.com/mk2/tsrm/LU/8","prev":{"page":7,"url":"https://tsrm.sasquatchvc.com/mk2/tsrm/LU/7","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/LU/7"},"next":{"page":9,"url":"https://tsrm.sasquatchvc.com/mk2/tsrm/LU/9","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/LU/9"},"section_url":"https://tsrm.sasquatchvc.com/mk2/tsrm/LU","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/LU/1","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/LU/2","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/LU/3","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/LU/4","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/LU/5","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/LU/6","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/LU/7","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/LU/8","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/LU/9"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}