{"model":"mk2","model_name":"MK2 Supra","vehicle":"Toyota Supra A60 (1982–1986, 5M-GE)","document":"Repair Manual","section":"PR","section_name":"Propeller Shaft","page":5,"pages_in_section":8,"title":"Inspection of Propeller Shaft Components","section_header":"Propeller Shaft — Propeller Shaft","ocr_text":"INSPECTION OF PROPELLER SHAFT\nCOMPONENTS\n\n1. INSPECT PROPELLER AND INTERMEDIATE SHAFTS\nFOR DAMAGE OR RUNOUT\nIf shaft runout is greater than maximum, replace the shaft.\nMaximum runout: 0.8 mm (0.031 in.)\n\n2. INSPECT SPIDER BEARINGS\n(a) Inspect the spider bearings for wear or damage.\n(b) Check the spider bearing axial play by turning the\nyoke while holding the shaft tightly.\nBearing axial play: 0 mm (0 in.)\nIf necessary, replace the propeller shaft.\n\n3. INSPECT CENTER SUPPORT BEARING FOR WEAR\nOR DAMAGE\nCheck that the bearing turns freely.\nIf the bearing is damaged, worn, or does not turn freely,\nreplace it.","image":"https://tsrm.sasquatchvc.com/images/mk2/PR/PR_005.png","url":"https://tsrm.sasquatchvc.com/mk2/tsrm/PR/5","prev":{"page":4,"url":"https://tsrm.sasquatchvc.com/mk2/tsrm/PR/4","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/PR/4"},"next":{"page":6,"url":"https://tsrm.sasquatchvc.com/mk2/tsrm/PR/6","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/PR/6"},"section_url":"https://tsrm.sasquatchvc.com/mk2/tsrm/PR","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/PR/1","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/PR/2","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/PR/3","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/PR/4","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/PR/5","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/PR/6","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/PR/7","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/PR/8"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}