{"model":"mk2","model_name":"MK2 Supra","vehicle":"Toyota Supra A60 (1982–1986, 5M-GE)","document":"Repair Manual","section":"ST","section_name":"Starting System","page":10,"pages_in_section":10,"title":"Installation of Starter","section_header":"Starting System — Starter","ocr_text":"INSTALLATION OF STARTER\n\n1. INSTALL STARTER MOTOR IN FLYWHEEL BELLHOUSING\nPlace the starter motor in the flywheel bellhousing. Install the two bolts.\n\n2. CONNECT TWO WIRES TO STARTER\nConnect the connector to the terminal on the magnetic switch. Connect the cable from the battery to the terminal on the switch, and install the nut.\n\n3. CONNECT CABLE TO NEGATIVE TERMINAL OF BATTERY\nCheck that the car starts.","image":"https://tsrm.sasquatchvc.com/images/mk2/ST/ST_010.png","url":"https://tsrm.sasquatchvc.com/mk2/tsrm/ST/10","prev":{"page":9,"url":"https://tsrm.sasquatchvc.com/mk2/tsrm/ST/9","api":"https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/ST/9"},"next":null,"section_url":"https://tsrm.sasquatchvc.com/mk2/tsrm/ST","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/ST/1","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/ST/2","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/ST/3","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/ST/4","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/ST/5","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/ST/6","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/ST/7","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/ST/8","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/ST/9","https://tsrm.sasquatchvc.com/api/pages/mk2/tsrm/ST/10"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}