{"model":"mk3","model_name":"MK3 Supra","vehicle":"Toyota Supra A70 (1986.5–1992, 7M-GE / 7M-GTE)","document":"Repair Manual","section":"A","section_name":"Service Specifications","page":27,"pages_in_section":36,"title":"Rear Axle and Suspension","section_header":"Service Specifications — Rear Axle and Suspension","ocr_text":"REAR AXLE AND SUSPENSION\nSpecifications\n\nRear wheel alignment\n                                                    Inspection STD          Adjustment STD\nCamber\n         Left-right error                          -45' ± 45'              -45' ± 30'\n                                                    30'                     30'\nToe-in                                              4 ± 2 mm                4 ± 1 mm\n                                                    (0.16 ± 0.08 in.)       (0.16 ± 0.04 in.)\n\nRear axle hub    Bearing axial direction play    Limit       0.05 mm                     0.0020 in.\n                 Axle shaft flange runout        Limit       0.05 mm                     0.0020 in.\n\nDrive shaft      Drive shaft length                          551.8 — 554.8 mm            21.724 — 21.824 in.\n\nDifferential     Drive pinion bearing preload    at Starting\n                                                 New bearing     10 — 16 kg·cm\n                                                                 (8.7 — 13.9 in.·lb, 1.0 — 1.6 N·m)\n                                                 Reused bearing  5 — 8 kg·cm\n                                                                 (4.3 — 6.9 in.·lb, 0.5 — 0.8 N·m)\n                 Total preload                   at Starting     Add drive pinion bearing preload\n                                                                 4 — 6 kg·cm (3.5 — 5.2 in.·lb, 0.4 — 0.6 N·m)\n                 Drive pinion to ring gear backlash              0.13 — 0.18 mm              0.0051 — 0.0071 in.\n                 Pinion gear to side gear backlash               0.05 — 0.20 mm              0.0020 — 0.0079 in.\n                 Ring gear runout                Limit           0.1 mm                      0.004 in.\n                 Companion flange runout\n                      Axial        Lateral runout                0.1 mm                      0.004 in.\n                      Radial runout                              0.1 mm                      0.004 in.\n                 Ring gear installing temperature                90 — 110°C                  194 — 230°F\n                 Drive pinion oil seal drive in depth            1.5 mm                      0.059 in.\n                 Side gear oil seal drive in depth               Flush the carrier end surface\n                 Side gear shaft runout          Max. limit      0.2 mm                      0.008 in.\n                 Side gear thrust washer thickness\n                      (Conventional 2 pinion type)               1.58 — 1.62 mm              0.0622 — 0.0638 in.\n                                                                 1.68 — 1.72 mm              0.0661 — 0.0677 in.\n                                                                 1.78 — 1.82 mm              0.0701 — 0.0717 in.\n                      (Conventional 4 pinion type)               0.9 mm                      0.035 in.\n                                                                 1.0 mm                      0.039 in.\n                                                                 1.1 mm                      0.043 in.\n                                                                 1.2 mm                      0.047 in.\n                                                                 1.3 mm                      0.051 in.\n                      (LSD)                                      0.15 mm                     0.0059 in.\n                                                                 0.20 mm                     0.0079 in.\n                                                                 0.25 mm                     0.0098 in.\n                                                                 0.30 mm                     0.0118 in.\n                                                                 0.35 mm                     0.0138 in.\n                 Drive pinion adjusting plate washer thickness   1.70 mm                     0.0669 in.\n                                                                 1.73 mm                     0.0681 in.\n                                                                 1.76 mm                     0.0693 in.\n                                                                 1.79 mm                     0.0705 in.\n                                                                 1.82 mm                     0.0717 in.\n                                                                 1.85 mm                     0.0728 in.\n                                                                 1.88 mm                     0.0740 in.","image":"https://tsrm.sasquatchvc.com/images/mk3/A/A_027.png","url":"https://tsrm.sasquatchvc.com/mk3/tsrm/A/27","prev":{"page":26,"url":"https://tsrm.sasquatchvc.com/mk3/tsrm/A/26","api":"https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/26"},"next":{"page":28,"url":"https://tsrm.sasquatchvc.com/mk3/tsrm/A/28","api":"https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/28"},"section_url":"https://tsrm.sasquatchvc.com/mk3/tsrm/A","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/1","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/2","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/3","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/4","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/5","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/6","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/7","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/8","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/9","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/10","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/11","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/12","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/13","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/14","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/15","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/16","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/17","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/18","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/19","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/20","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/21","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/22","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/23","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/24","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/25","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/26","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/27","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/28","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/29","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/30","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/31","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/32","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/33","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/34","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/35","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/A/36"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}