{"model":"mk3","model_name":"MK3 Supra","vehicle":"Toyota Supra A70 (1986.5–1992, 7M-GE / 7M-GTE)","document":"Repair Manual","section":"CH","section_name":"Charging System","page":14,"pages_in_section":18,"title":"Assembly of Alternator","section_header":"Charging System — Alternator","ocr_text":"CH-14\n\nCHARGING SYSTEM — Alternator\n\nASSEMBLY OF ALTERNATOR\n(See page CH-6)\n\n1. INSTALL ROTOR TO DRIVE END FRAME\n\n2. [7M-GE (A/T) and 7M-GTE]\nPLACE ALTERNATOR WASHER ON REAR BEARING\n\nCH0636\n\n3. INSTALL RECTIFIER END FRAME\n(a) Using a plastic-faced hammer, lightly tap in the end frame.\n(b) Install the four nuts.\n\nCH0634\n\n4. INSTALL PULLEY\n(a) Install the pulley to the rotor shaft by tightening the pulley nut by hand.\n(b) Hold SST (A) with a torque wrench, and tighten SST (B) clockwise to the specified torque.\nSST 09820-63010\nTorque: 400 kg-cm (29 ft-lb, 39 N·m)\n(c) Check that SST (A) is secured to the pulley shaft.\n(d) As shown in the illustration, mount SST (C) in a vise, and install the alternator to SST (C).\n(e) To torque the pulley nut, turn SST (A) in the direction shown in the illustration.\nTorque: 1,125 kg-cm (81 ft-lb, 110 N·m)\n(f) Remove the alternator from SST (C).\n(g) Turn SST (B) and remove SST (A and B).\n\nSST (B)\nSST (A)\nCH0213\n\nSST (C)\nCH0214 CH0217\n\n5. [7M-GE (A/T) and 7M-GTE]\nPLACE SEAL PLATE ON RECTIFIER END FRAME\n\nCH0637","image":"https://tsrm.sasquatchvc.com/images/mk3/CH/CH_014.png","url":"https://tsrm.sasquatchvc.com/mk3/tsrm/CH/14","prev":{"page":13,"url":"https://tsrm.sasquatchvc.com/mk3/tsrm/CH/13","api":"https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/13"},"next":{"page":15,"url":"https://tsrm.sasquatchvc.com/mk3/tsrm/CH/15","api":"https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/15"},"section_url":"https://tsrm.sasquatchvc.com/mk3/tsrm/CH","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/1","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/2","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/3","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/4","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/5","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/6","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/7","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/8","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/9","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/10","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/11","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/12","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/13","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/14","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/15","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/16","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/17","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CH/18"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}