{"model":"mk3","model_name":"MK3 Supra","vehicle":"Toyota Supra A70 (1986.5–1992, 7M-GE / 7M-GTE)","document":"Repair Manual","section":"CL","section_name":"Clutch","page":7,"pages_in_section":16,"title":"Inspection of Master Cylinder","section_header":"Clutch — Clutch Master Cylinder","ocr_text":"INSPECTION OF MASTER CYLINDER\n\nHINT: Clean the disassembled parts with compressed air.\n\n1. INSPECT MASTER CYLINDER BORE FOR SCORING OR CORROSION\nIf a problem is found, clean or replace the cylinder.\n\n2. INSPECT PISTON AND CUPS FOR WEAR, SCORING, CRACKS OR SWELLING\nIf either one requires replacement, use the parts from the cylinder kit.\n\n3. INSPECT PUSH ROD FOR WEAR OR DAMAGE\nIf necessary, replace the push rod.\n\nASSEMBLY OF MASTER CYLINDER\n(See page CL-6)\n\n1. COAT PARTS WITH LITHIUM SOAP BASE GLYCOL GREASE, AS SHOWN\n\n2. INSERT PISTON INTO CYLINDER\n\n3. INSTALL PUSH ROD ASSEMBLY WITH SNAP RING\n\n4. INSTALL RESERVOIR TANK\nTorque: 250 kg-cm (18 ft-lb, 25 N-m)\n\nINSTALLATION OF MASTER CYLINDER\n(See page CL-6)\n\n1. POSITION MASTER CYLINDER AND CONNECT CLUTCH LINE UNION\nFirst finger-tighten the union nut and then tighten it to specified torque with SST.\nSST 09751-36011\nTorque: 155 kg-cm (11 ft-lb, 15 N-m)\n\n2. INSTALL AND TIGHTEN MOUNTING NUTS\n\n3. INSTALL PUSH ROD ASSEMBLY TO CLUTCH PEDAL\nSecure the clevis pin with the spring washer and clip.\n\n4. BLEED CLUTCH SYSTEM\n(See page CL-4)\n\n5. CHECK FOR LEAKS\n\n6. CHECK AND ADJUST CLUTCH PEDAL\n(See page CL-3)\n\n7. INSTALL INSTRUMENT LOWER FINISH PANEL AND AIR DUCT","image":"https://tsrm.sasquatchvc.com/images/mk3/CL/CL_007.png","url":"https://tsrm.sasquatchvc.com/mk3/tsrm/CL/7","prev":{"page":6,"url":"https://tsrm.sasquatchvc.com/mk3/tsrm/CL/6","api":"https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/6"},"next":{"page":8,"url":"https://tsrm.sasquatchvc.com/mk3/tsrm/CL/8","api":"https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/8"},"section_url":"https://tsrm.sasquatchvc.com/mk3/tsrm/CL","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/1","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/2","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/3","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/4","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/5","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/6","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/7","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/8","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/9","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/10","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/11","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/12","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/13","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/14","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/15","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/CL/16"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}