{"model":"mk3","model_name":"MK3 Supra","vehicle":"Toyota Supra A70 (1986.5–1992, 7M-GE / 7M-GTE)","document":"Repair Manual","section":"PR","section_name":"Propeller Shaft","page":10,"pages_in_section":10,"title":"Propeller Shaft","section_header":"Propeller Shaft — Propeller Shaft","ocr_text":"PR-10                    PROPELLER SHAFT — Propeller Shaft\n\n3.    INSTALL CENTER SUPPORT BEARING TO BODY\n(a)   Install the center support bearing to the body with the\n      two mount bolts finger tight.\n(b)   Check that the bearing bracket is at right angle to the\n      propeller shaft. Adjust the bracket if necessary.\n(c)   Check that the center line of the center bearing is set\n      to the center line of the bracket when the vehicle is\n      in a no-load condition. Adjust the center bearing if\n      necessary.\n\n(d)   Torque the bolts.\n      Torque:   500 kg-cm (36 ft-lb, 49 N·m)","image":"https://tsrm.sasquatchvc.com/images/mk3/PR/PR_010.png","url":"https://tsrm.sasquatchvc.com/mk3/tsrm/PR/10","prev":{"page":9,"url":"https://tsrm.sasquatchvc.com/mk3/tsrm/PR/9","api":"https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/PR/9"},"next":null,"section_url":"https://tsrm.sasquatchvc.com/mk3/tsrm/PR","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/PR/1","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/PR/2","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/PR/3","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/PR/4","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/PR/5","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/PR/6","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/PR/7","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/PR/8","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/PR/9","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/PR/10"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}