{"model":"mk3","model_name":"MK3 Supra","vehicle":"Toyota Supra A70 (1986.5–1992, 7M-GE / 7M-GTE)","document":"Repair Manual","section":"ST","section_name":"Starting System","page":10,"pages_in_section":12,"title":"Starting System","section_header":"Starting System — Starter","ocr_text":"ST-10\n\nSTARTING SYSTEM — Starter\n\n(c) Place the starter housing on the magnetic switch and install the two screws.\n\n6. INSTALL FIELD FRAME WITH ARMATURE TO MAGNETIC SWITCH ASSEMBLY\n\n(a) Place a new O-ring on the field frame.\n\n(b) Align the protrusion of the field frame with the cutout of the magnetic switch.\n\n(c) Install the two through bolts.\n\n(d) Connect the lead wire to the magnetic switch terminal C, and install the nut.\n\nST0281\n\nST0632\n\nST0627 ST0628","image":"https://tsrm.sasquatchvc.com/images/mk3/ST/ST_010.png","url":"https://tsrm.sasquatchvc.com/mk3/tsrm/ST/10","prev":{"page":9,"url":"https://tsrm.sasquatchvc.com/mk3/tsrm/ST/9","api":"https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/9"},"next":{"page":11,"url":"https://tsrm.sasquatchvc.com/mk3/tsrm/ST/11","api":"https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/11"},"section_url":"https://tsrm.sasquatchvc.com/mk3/tsrm/ST","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/1","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/2","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/3","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/4","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/5","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/6","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/7","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/8","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/9","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/10","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/11","https://tsrm.sasquatchvc.com/api/pages/mk3/tsrm/ST/12"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}