{"model":"mk4","model_name":"MK4 Supra","vehicle":"Toyota Supra A80 (1993–2002, 2JZ-GE / 2JZ-GTE)","document":"Electrical Wiring Diagram","section":"TRBL","section_name":"Troubleshooting","page":5,"pages_in_section":7,"title":"Troubleshooting","section_header":"Troubleshooting","ocr_text":"TROUBLESHOOTING\n\nRetainer at Full Lock Position\n\nRetainer at Temporary Lock Position\n(Male)                    (Female)\n\nPush the terminal retainer down to the temporary lock position.\n\nLocking Lug\n\nTool\n\n(c) Release the locking lug from terminal and pull the terminal out from rear.\n\n4. INSTALL TERMINAL TO CONNECTOR\n(a) Insert the terminal.\n\nHINT:\n1. Make sure the terminal is positioned correctly.\n2. Insert the terminal until the locking lug locks firmly.\n3. Insert the terminal with terminal retainer in the temporary lock position.\n\n(b) Push the secondary locking device or terminal retainer in to the full lock position.\n\n5. CONNECT CONNECTOR\n\n14","image":"https://tsrm.sasquatchvc.com/images/mk4-ewd/TRBL/TRBL_005.png","url":"https://tsrm.sasquatchvc.com/mk4/ewd/TRBL/5","prev":{"page":4,"url":"https://tsrm.sasquatchvc.com/mk4/ewd/TRBL/4","api":"https://tsrm.sasquatchvc.com/api/pages/mk4/ewd/TRBL/4"},"next":{"page":6,"url":"https://tsrm.sasquatchvc.com/mk4/ewd/TRBL/6","api":"https://tsrm.sasquatchvc.com/api/pages/mk4/ewd/TRBL/6"},"section_url":"https://tsrm.sasquatchvc.com/mk4/ewd/TRBL","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk4/ewd/TRBL/1","https://tsrm.sasquatchvc.com/api/pages/mk4/ewd/TRBL/2","https://tsrm.sasquatchvc.com/api/pages/mk4/ewd/TRBL/3","https://tsrm.sasquatchvc.com/api/pages/mk4/ewd/TRBL/4","https://tsrm.sasquatchvc.com/api/pages/mk4/ewd/TRBL/5","https://tsrm.sasquatchvc.com/api/pages/mk4/ewd/TRBL/6","https://tsrm.sasquatchvc.com/api/pages/mk4/ewd/TRBL/7"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}