{"model":"mk4","model_name":"MK4 Supra","vehicle":"Toyota Supra A80 (1993–2002, 2JZ-GE / 2JZ-GTE)","document":"Repair Manual","section":"CL","section_name":"Clutch System","page":15,"pages_in_section":22,"title":"Clutch Unit Installation","section_header":"Clutch — Clutch Unit (2JZ–GTE)","ocr_text":"CL–15\nCLUTCH – CLUTCH UNIT (2JZ–GTE)\n\nCLUTCH UNIT INSTALLATION\n\n1. INSTALL CLUTCH DISC AND COVER ON FLY–WHEEL\n(a) Insert SST in the clutch disc, and then set them and the cover in position.\nSST 09301–00110\n\nFront\nSST\nQ04209\n213786\n\n(b) Align the matchmarks on the clutch cover and fly–wheel.\n(c) Tighten the bolts evenly and gradually while pushing the SST. Make several passes around the cover until it is snug.\n(d) Torque the bolts on the clutch cover in the order shown.\nTorque: 19 N·m (195 kgf·cm, 14 ft·lbf)\nHINT: Temporarily tighten the No.1 and No.2 bolts.\n\nMatchmarks\n3\n7\nSST\n6\n1, 4\n8\n2, 5\n004210\n\n2. CHECK DIAPHRAGM SPRING TIP ALIGNMENT\nUsing a dial indicator with roller instrument, check the diaphragm spring tip alignment.\nMaximum non–alignment:\n0.5 mm (0.020 in.)\nIf alignment is not as specified, use the SST to adjust the diaphragm spring tip alignment.\nSST 09333–00013\n\nSST\n006253\n\n3. REMOVE CLUTCH COVER AND CLUTCH DISC\n\n4. INSTALL CLUTCH RELEASE FORK\n(a) Install the wave washer and pin to release fork.\n(b) Install a new E–ring.\n\n004219\n\n5. APPLY MOLYBDENUM DISULPHIDE LITHIUM BASE GREASE (NLGI NO.2)\n(a) Apply release hub grease to these parts:\n• Release fork and hub contact point\n• Release fork and push rod contact point\n• Release fork pivot point\n\n004409","image":"https://tsrm.sasquatchvc.com/images/mk4/CL/CL_015.png","url":"https://tsrm.sasquatchvc.com/mk4/tsrm/CL/15","prev":{"page":14,"url":"https://tsrm.sasquatchvc.com/mk4/tsrm/CL/14","api":"https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/14"},"next":{"page":16,"url":"https://tsrm.sasquatchvc.com/mk4/tsrm/CL/16","api":"https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/16"},"section_url":"https://tsrm.sasquatchvc.com/mk4/tsrm/CL","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/1","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/2","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/3","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/4","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/5","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/6","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/7","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/8","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/9","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/10","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/11","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/12","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/13","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/14","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/15","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/16","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/17","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/18","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/19","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/20","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/21","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CL/22"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}