{"model":"mk4","model_name":"MK4 Supra","vehicle":"Toyota Supra A80 (1993–2002, 2JZ-GE / 2JZ-GTE)","document":"Repair Manual","section":"CO","section_name":"Cooling System","page":3,"pages_in_section":30,"title":"Coolant Replacement","section_header":"Engine — Cooling System","ocr_text":"EG–331\nENGINE – COOLING SYSTEM\n\nCOOLANT REPLACEMENT\n\n1. DRAIN ENGINE COOLANT\n(a) Remove the radiator cap.\nCAUTION: To avoid the danger of being burned, do not remove the radiator cap while the engine and radiator are still hot, as fluid and steam can be blown out under pressure.\n\nDrain Plug\n\nP04B04\nDrain Plug\n207402\n\n(b) Loosen the 2 drain plugs (for the engine and radiator), and drain the coolant.\n(c) Close the drain plugs.\nTorque:\nEngine drain plug\n29 N·m (300 kgf·cm, 22 ft·lbf)\n\n2. FILL ENGINE COOLANT\n(a) Slowly fill the system with coolant.\n• Use a good brand of ethylene–glycol base coolant and mix it according to the manufacturer's directions.\n• Using coolant which includes more than 50 % ethylene–glycol (but not more than 70 %) is recommended.\nNOTICE:\n• Do not use an alcohol type coolant.\n• The coolant should be mixed with demineralized water or distilled water.\nCapacity (w/ Heater):\n2JZ–GE\nM/T\n7.3 liters (7.7 US qts, 6.4 Imp. qts)\nA/T\n8.3 liters (8.8 US qts, 7.3 Imp. qts)\n2JZ–GTE\nM/T\n9.5 liters (10.0 US qts, 8.4 Imp. qts)\nA/T\n9.4 liters (9.9 US qts, 8.3 Imp. qts)\n(b) Install the radiator cap.\n(c) Start the engine, and bleed the cooling system.\n(d) Refill the reservoir with coolant until it reaches the \"FULL\" line.\n\n3. CHECK ENGINE COOLANT FOR LEAKS","image":"https://tsrm.sasquatchvc.com/images/mk4/CO/CO_003.png","url":"https://tsrm.sasquatchvc.com/mk4/tsrm/CO/3","prev":{"page":2,"url":"https://tsrm.sasquatchvc.com/mk4/tsrm/CO/2","api":"https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/2"},"next":{"page":4,"url":"https://tsrm.sasquatchvc.com/mk4/tsrm/CO/4","api":"https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/4"},"section_url":"https://tsrm.sasquatchvc.com/mk4/tsrm/CO","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/1","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/2","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/3","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/4","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/5","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/6","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/7","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/8","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/9","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/10","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/11","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/12","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/13","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/14","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/15","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/16","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/17","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/18","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/19","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/20","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/21","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/22","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/23","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/24","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/25","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/26","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/27","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/28","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/29","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/CO/30"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}