{"model":"mk4","model_name":"MK4 Supra","vehicle":"Toyota Supra A80 (1993–2002, 2JZ-GE / 2JZ-GTE)","document":"Repair Manual","section":"IGTE","section_name":"Ignition System 2JZ-GTE","page":5,"pages_in_section":13,"title":"Ignition Coil Inspection","section_header":"Ignition System — (2JZ-GTE)","ocr_text":"IG–23\nIGNITION SYSTEM – (2JZ–GTE)\n\nSPARK PLUG\nCLEANER\nIG0152\n\n6. CLEAN SPARK PLUGS\nIf the electrode has traces of wet carbon, allow it to dry and\nthen clean with a spark plug cleaner.\nAir pressure:\n    Below 588 kPa (6 kgf/cm2, 85 psi)\nDuration:\n    20 seconds or less\nHINT: If there are traces of oil, remove it with gasoline before\nusing the spark plug cleaner.\n7. REINSTALL SPARK PLUGS\nTorque: 18 N·m (180 kgf·cm, 13 ft·lbf)\n8. REINSTALL IGNITION COILS ASSEMBLIES\n(See ignition coils installation)\n\nIGNITION COIL INSPECTION\n\nNOTICE: \"Cold\" and \"Hot\" in the following sentences express\nthe temperature of the coils themselves. \"Cold\" is from –10°C\n(14°F) to 50°C (122°F) and \"Hot\" is from 50°C (122°F) to 100°C\n(212°F).\n1. REMOVE NO.3 TIMING BELT COVER\n2. DISCONNECT IGNITION COIL CONNECTORS\n\nOhmmeter\nF11795\n\n3. INSPECT PRIMARY COIL RESISTANCE\nUsing an ohmmeter, measure the resistance between the\npositive (+) and negative (–) terminals.\nPrimary coil resistance:\n    Cold\n        0.54 – 0.84 Ω\n    Hot\n        0.68 – 0.98 Ω\nIf the resistance is not as specified, replace the ignition coil.\n4. RECONNECT IGNITION COIL CONNECTORS\n5. REINSTALL NO.3 TIMING BELT COVER","image":"https://tsrm.sasquatchvc.com/images/mk4/IGTE/IGTE_005.png","url":"https://tsrm.sasquatchvc.com/mk4/tsrm/IGTE/5","prev":{"page":4,"url":"https://tsrm.sasquatchvc.com/mk4/tsrm/IGTE/4","api":"https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/4"},"next":{"page":6,"url":"https://tsrm.sasquatchvc.com/mk4/tsrm/IGTE/6","api":"https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/6"},"section_url":"https://tsrm.sasquatchvc.com/mk4/tsrm/IGTE","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/1","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/2","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/3","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/4","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/5","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/6","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/7","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/8","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/9","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/10","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/11","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/12","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/IGTE/13"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}