{"model":"mk4","model_name":"MK4 Supra","vehicle":"Toyota Supra A80 (1993–2002, 2JZ-GE / 2JZ-GTE)","document":"Repair Manual","section":"MA","section_name":"Maintenance","page":9,"pages_in_section":19,"title":"Maintenance","section_header":"Maintenance — Maintenance Operations","ocr_text":"MA–9\nMAINTENANCE – MAINTENANCE OPERATIONS\n\nPort A\n2JZ-GTE only\nCompressed\nAir\nP12161\n\n• Blow low compressed air (4.71 kPa (48 gf/cm2, 0.68 psi)) into port A and check that air does not flow from the other ports.\nIf operation is not as specified, replace the charcoal canister.\n\n2JZ-GTE\nPort B\nCompressed\nAir\nP12155\n\n• 2JZ–GTE:\nBlow low compressed air (4.71 kPa (48 gf/cm2, 0.68 psi)) into port B and check that air does not flow from the other ports.\nIf operation is not as specified, replace the charcoal canister.\n\nPort B (2JZ-GTE only)\nPort A\nPort C\nCompressed\nAir\nP12162\n\n(d) Clean the filter in the canister.\nClean the filter by blowing 294 kPa (3 kgf/cm2, 43 psi) of compressed air into port C while holding port A and B (2JZ–GTE only) closed.\nNOTICE:\n• Do not attempt to wash the canister.\n• No activated carbon should come out.\n(e) Reinstall the charcoal canister.\n\n9. REPLACE GASKET IN FUEL TANK CAP\n\nGasket\nN08009\n\n(a) Remove the old gasket from the tank cap. Do not damage the cap.\n(b) Install a new gasket by hand.\n(c) Check the cap for damage or cracks.\n(d) Install the cap and check the torque limiter.\n\n10. INSPECT FUEL LINES AND CONNECTIONS\nVisually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness.\n\n11. INSPECT EXHAUST PIPES AND MOUNTINGS\nVisually check the pipes, hangers and connections for severe corrosion, leaks or damage.\n\n12. ADJUST VALVE CLEARANCE\n(See valve clearance inspection and adjustment in Engine Mechanical)\nValve clearance (Cold):\n    Intake\n        0.15–0.25 mm (0.006–0.010 in.)\n    Exhaust\n        0.25–0.35 mm (0.010–0.014 in.)","image":"https://tsrm.sasquatchvc.com/images/mk4/MA/MA_009.png","url":"https://tsrm.sasquatchvc.com/mk4/tsrm/MA/9","prev":{"page":8,"url":"https://tsrm.sasquatchvc.com/mk4/tsrm/MA/8","api":"https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/8"},"next":{"page":10,"url":"https://tsrm.sasquatchvc.com/mk4/tsrm/MA/10","api":"https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/10"},"section_url":"https://tsrm.sasquatchvc.com/mk4/tsrm/MA","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/1","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/2","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/3","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/4","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/5","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/6","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/7","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/8","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/9","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/10","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/11","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/12","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/13","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/14","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/15","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/16","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/17","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/18","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/MA/19"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}