{"model":"mk4","model_name":"MK4 Supra","vehicle":"Toyota Supra A80 (1993–2002, 2JZ-GE / 2JZ-GTE)","document":"Repair Manual","section":"PR","section_name":"Propeller Shaft","page":16,"pages_in_section":23,"title":"Propeller Shaft","section_header":"Propeller Shaft — Propeller Shaft","ocr_text":"PR–15\nPROPELLER SHAFT – PROPELLER SHAFT\n\nSST\nR06872\n\nMatchmarks\nR07621\n\n120°\nPhasemarks\nE07096\n\n12.5 ± 1 mm\n(0.492 ± 0.04 in.)\nR07Z50\n\n2JZ–GE:\n(a) Remove SST.\n(b) Insert the propeller shaft to the transmission.\n(c) Insert the propeller shaft from the vehicle's rear and connect\nthe transmission and differential.\nNOTICE: Support the center support bearing by hand so\nthat the transmission and intermediate shaft, and propel-\nler shaft and differential, remain in a straight line.\n(d) Temporarily install the center support bearing set bolts with\nthe adjusting washers.\nHINT: Use the adjusting washers which were removed.\n(e) Align the matchmarks and install the propeller shaft on the\ndifferential with the 3 bolts, washers and nuts.\nNOTICE: Bolts should be inserted from the propeller\nshaft side.\nTorque: 79 N·m (805 kgf·cm, 58 ft·lbf)\n\nIf using a new propeller shaft\nw/ Phasemarks:\nInstall the propeller shaft phasemarks and differential phase-\nmarks so that their respective alignment phasemarks match.\nIf the propeller shaft phasemarks and differential phase-\nmarks do not align, install the propeller shaft and differential\nalignment phasemarks as close together as possible.\nw/o Phasemarks:\nInstall the propeller shaft.\n(See page PR–13)\n\n(f) Torque the 2 center support bearing set bolts.\nTorque: 49 N·m (500 kgf·cm, 36 ft·lbf)\nHINT: Adjust the center support bearing to keep the dimen-\nsion, as shown with the vehicle in the unladen condition.\nUnder the same condition, check if the center line of the cen-\nter support bearing is at right angles to the shaft axial direc-\ntion.","image":"https://tsrm.sasquatchvc.com/images/mk4/PR/PR_016.png","url":"https://tsrm.sasquatchvc.com/mk4/tsrm/PR/16","prev":{"page":15,"url":"https://tsrm.sasquatchvc.com/mk4/tsrm/PR/15","api":"https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/15"},"next":{"page":17,"url":"https://tsrm.sasquatchvc.com/mk4/tsrm/PR/17","api":"https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/17"},"section_url":"https://tsrm.sasquatchvc.com/mk4/tsrm/PR","section_api_pages":["https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/1","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/2","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/3","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/4","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/5","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/6","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/7","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/8","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/9","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/10","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/11","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/12","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/13","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/14","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/15","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/16","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/17","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/18","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/19","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/20","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/21","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/22","https://tsrm.sasquatchvc.com/api/pages/mk4/tsrm/PR/23"],"note":"OCR transcript of a scanned Toyota factory manual page; verify critical values (torque specs, part numbers) against the image."}