6. REMOVE SHAFT SEAL Insert SST against the shaft, and turn it clockwise while pressing in the remover. Then remove the shaft seal. SST 07114 15010 7. REMOVE TWO SERVICE VALVES (a) Using SST, remove the bolts holding the two service valves. SST 07110 61050 (b) Remove the O-rings from the service valves and discard them. 8. DRAIN OIL INTO CONTAINER 9. REMOVE FRONT HOUSING (a) Using SST, remove the six through bolts. NOTE: Do not reuse the six washers. SST 07110 61050 (b) Using a hammer and punch, remove the front housing by tapping on the protrusion. CAUTION: Be careful not to scratch the sealing surface of the front housing.