INSTALLATION OF FRONT DOOR (See page BO-3) 1. BEFORE INSTALLING PARTS COAT THEM WITH MP GREASE (a) Coat the sliding surface and gears with MP grease. (b) Coat the sliding surface with MP grease. 2. INSTALL DOOR LOCK AND SOLENOID WITH MOUNTING SCREWS 3. INSTALL OUTSIDE HANDLE 4. INSTALL INSIDE HANDLE 5. CONNECT FOLLOWING LINKAGES: (a) Outside control link (b) Door lock control link (c) Door lock cylinder link (d) Door open control link 6. ADJUST DOOR INSIDE HANDLE (a) Loosen the screws. (b) Push the door handle forward until strong resistance is felt. Move handle back 0.5 — 1.0 mm (0.020 — 0.039 in.) and tighten the mounting bolts. 7. ADJUST DOOR INSIDE LOCK (a) Loosen the adjusting bolt. (b) Push the door lock adjusting bolt upward until strong resistance is felt. Move the bolt down 0.5 — 1.0 mm (0.020 — 0.039 in.) and tighten the bolt.