
EM-42 ENGINE MECHANICAL — Cylinder Block
DISASSEMBLY OF CYLINDER BLOCK
(See page EM-38)
1. REMOVE CLUTCH COVER AND DISC
2. REMOVE FLYWHEEL OR DRIVE PLATE AND REAR END PLATE
3. INSTALL ENGINE STAND FOR DISASSEMBLY
4. REMOVE CYLINDER HEAD ASSEMBLY
(a) Disconnect the No. 1 water by-pass hose from the water by-pass pipe.
(b) Disconnect the PCV hose from the cylinder block.
(c) Remove the timing belt. (See pages EM-11 to 13)
(d) Remove the No. 2 timing belt cover.
(e) Remove the air intake chamber stay.
(f) Using SST, remove the cylinder head bolts.
SST 09043-38100
(g) Remove the cylinder head assembly.
5. REMOVE OIL FILTER
Using SST, remove the oil filter.
SST 09228-44010
6. REMOVE OIL LEVEL GAUGE
7. REMOVE ALTERNATOR
8. REMOVE FUEL FILTER
9. REMOVE FUEL HOSE SUPPORT
10. REMOVE WATER BY-PASS PIPE
(a) Remove the two bolts from the timing belt case.
(b) Remove the three bolts from the cylinder block and remove the water by-pass pipe with gasket.
11. REMOVE OIL PAN
(See page LU-5)