Fuel Tank and Line Inlet Pipe Rubber Protector Cap Fuel Sender Gauge Rubber Protector Fuel Pump Tank Protector Tank Band 220 [16, 22] kg·cm [ft·lb, N·m] : Specified torque • Non-reusable part FI0027 PRECAUTIONS 1. Always use new gaskets when replacing the fuel tank or component parts. 2. When re-installing, be sure to include the rubber protectors on the upper surfaces of the fuel tank and tank band. 3. Apply the proper torque to all tightening parts. MAM491 INSPECT FUEL LINES AND CONNECTIONS (a) Inspect the fuel lines for cracks, leakage or connections deformation. (b) Inspect the fuel tank vapor vent system hoses and connections for looseness, sharp bends or damage. (c) Inspect the fuel tank for deformation, cracks, fuel leakage or tank band looseness. (d) Inspect the inlet pipe for damage or fuel leakage. (e) Hose and tube connections are as shown in the illustration. If problem is found, repair or replace the parts as necessary. 310 kg-cm (22 ft-lb, 30 N·m) SST SST: 09631-22020 FI0029 2 - 7 mm (0.08 - 0.28 in.) Pipe Hose Clip 0 - 3 mm (0 - 0.12 in.) FI0001