REPLACEMENT OF POWER STEERING FLUID 1. JACK UP FRONT OF VEHICLE AND SUPPORT IT WITH STANDS 2. REMOVE FLUID RETURN HOSE FROM RESERVOIR TANK AND DRAIN FLUID INTO A CONTAINER 3. WITH ENGINE IDLING, TURN STEERING WHEEL FROM LOCK TO LOCK WHILE DRAINING FLUID 4. STOP ENGINE 5. FILL RESERVOIR WITH FRESH FLUID Fluid: ATF DEXRON® or DEXRON® II 6. START ENGINE AND RUN IT AT 1,000 RPM After 1 or 2 seconds, fluid will begin to discharge from the return hose. Stop the engine immediately at this time. 7. REPEAT STEPS 5 AND 6 FOUR OR FIVE TIMES 8. CONNECT RETURN HOSE TO RESERVOIR TANK 9. BLEED POWER STEERING SYSTEM