Strut Bar (See page FA-14) REMOVAL OF STRUT BAR 1. REMOVE STRUT BAR FROM BRACKET Remove the nut and strut bar from the bracket. NOTE: Do not remove the staked nut. 2. REMOVE STRUT BAR FROM LOWER ARM Jack up the lower arm and disconnect the strut bar. Remove the bolt holding the strut bar to the lower arm and disconnect the strut bar. INSTALLATION OF STRUT BAR 1. ADJUST STAKED NUT Check that the distance between the staked nut and center of the bolt hole is 369.1 mm (14.531 in.). Adjust staked nut as necessary. NOTE: Do not move staked nut unless required. 369.1 mm 2. CONNECT STRUT BAR TO LOWER ARM Connect the strut bar to the lower arm with a bolt. Torque the bolt. Torque: 670 kg·cm (48 ft·lb, 66 N·m) 3. CONNECT STRUT BAR TO BRACKET Connect the strut bar to the bracket with a nut. Torque the nut. Torque: 1,050 kg·cm (76 ft·lb, 103 N·m) 4. CHECK FRONT WHEEL ALIGNMENT AND SIDE SLIP (See page FA-3)