Page text (OCR transcript)
REPLACEMENT OF POWER STEERING FLUID
1. JACK UP FRONT OF VEHICLE AND SUPPORT IT WITH STANDS
2. REMOVE FLUID RETURN HOSE FROM RESERVOIR TANK AND DRAIN FLUID INTO A CONTAINER
3. WITH ENGINE IDLING, TURN STEERING WHEEL FROM LOCK TO LOCK WHILE DRAINING FLUID
4. STOP ENGINE
5. FILL RESERVOIR WITH FRESH FLUID
Fluid: ATF DEXRON® or DEXRON® II
6. START ENGINE AND RUN IT AT 1,000 RPM
After 1 or 2 seconds, fluid will begin to discharge from the return hose. Stop the engine immediately at this time.
7. REPEAT STEPS 5 AND 6 FOUR OR FIVE TIMES
8. CONNECT RETURN HOSE TO RESERVOIR TANK
9. BLEED POWER STEERING SYSTEM
