SEPARATE BASIC SUBASSEMBLY 1. REMOVE WIRE HARNESS CLAMP AND THROTTLE CABLE CLAMP 2. REMOVE CONTROL SHAFT LEVER 3. REMOVE NEUTRAL START SWITCH (a) Unstake the lock washer. (b) Remove the nut and bolt, and then remove the neutral start switch. (c) Remove the lock washer and grommet. 4. REMOVE UNIONS (a) Remove the two unions. (b) Remove the O-ring from the both unions. 5. REMOVE SPEEDOMETER DRIVEN GEAR (a) Remove the speedometer driven gear. (b) Remove the O-ring from it.