AUTOMATIC TRANSMISSION — Component Parts (Oil Pump) AT-69 ASSEMBLY OF OIL PUMP 1. INSTALL DRIVEN GEAR AND DRIVE GEAR TO OIL PUMP BODY (a) Place the oil pump body on the torque converter. (b) Coat the driven gear and drive gear with ATF. (c) Install the driven gear and drive gear. 2. INSTALL STATOR SHAFT TO OIL PUMP BODY (a) Align the stator shaft with each bolt hole. (b) Tighten the thirteen bolts. Torque: 100 kg·cm (7 ft·lb, 10 N·m) 3. INSTALL OIL SEAL RINGS (a) Coat the two oil seal rings with ATF. (b) Contract the oil seal rings as shown, install them onto the stator shaft. NOTICE: Do not spread the ring ends too much. HINT: After installing the oil seal rings, check that they rotate smoothly. 4. CHECK OIL PUMP DRIVE GEAR ROTATION Make sure the drive gear rotates smoothly.