BO-40 BODY — Quarter Window Glass INSTALLATION OF QUARTER WINDOW GLASS 1. CLEAN BODY OR GLASS Wipe off any adhesive left on the body or glass with cleaner. 2. INSTALL QUARTER WINDOW GLASS (a) Using a applicator, apply primer around the entire ceramic application area. HINT: Apply primer evenly and to the ceramic application area only. (b) Let the primer coating dry for 10 minutes. (c) Install the seal to the glass. HINT: Overlap the seal approx. 25 mm (0.98 in.) at the bottom of the glass. (d) Install the lower outside moulding to the glass. (e) Install the four upper retainer. (f) Install the window glass to the body. (g) Install the retainer nuts. 3. INSTALL QUARTER WINDOW GLASS MOULDING (See page BO-27) 4. INSTALL ROOF SIDE INNER GARNISH (See page BO-39) 5. INSTALL REAR SHOULDER BELT ANCHOR BOLT AND BELT GUIDE 6. INSTALL SPEAKER BOX AND DECK TRIM SIDE PANEL (See page BO-38) 7. INSTALL SPEAKER GRILLE (See page BO-38) 8. INSTALL QUARTER TRIM PANEL AND SEAT BACK HINGE (See page BO-38) 9. INSTALL FRONT SHOULDER BELT ANCHOR BOLT AND BELT GUIDE (See page BO-38) Torque: 440 kg·cm (32 ft·lb, 43 N·m) 10. INSTALL REAR SEAT BACK AND CUSHION (See page BO-38) 11. INSTALL DECK TRIM, REAR COVER AND TONNEAU COVER RETRACTOR