BO-62 BODY — Seat Belt SEAT BELT [Emergency Locking Retractor (ELR) Type] 1. RUNNING TEST (IN SAFE AREA) (a) Fasten the front seat belt. (b) Drive the car at 10 mph (16 km/h) and make a very hard stop. (c) Check that the belt is locked and cannot be extended at this time. HINT: Conduct this test in a safe area. If the belt does not lock, remove the belt mechanism assembly and conduct the following static check. Also, whenever installing a new belt assembly, verify proper operation before installation. 2. STATIC TEST (a) Remove the locking retractor assembly. (b) Tilt the retractor slowly. (c) Verify that the belt can be pulled out at a tilt of 15 degrees or less, and cannot be pulled out at over 45 degrees of tilt. If a problem is found, replace the assembly.