23. DISCONNECT FUEL PIPES 24. REMOVE EXHAUST PIPE 25. REMOVE PROPELLER SHAFT (See page PR-3) 26. DISCONNECT SPEEDOMETER CABLE 27. (A/T) REMOVE MANUAL SHIFT LINKAGE 28. REMOVE NO.1 FRONT CROSS MEMBER 29. (M/T) REMOVE CLUTCH RELEASE CYLINDER 30. PLACE JACK UNDER TRANSMISSION Be sure to put a wooden block between the jack and the transmission oil pan to prevent damage. 31. INSTALL A WOODEN BLOCK BETWEEN COWL PANEL AND CYLINDER HEAD REAR END TO PREVENT DAMAGE TO HEATER HOSE 32. REMOVE ENGINE REAR SUPPORT MEMBER WITH GROUND STRAP FROM BODY 33. REMOVE ENGINE WITH TRANSMISSION (a) Attach the engine hoist chain to the two engine hangers. (b) Remove the mounting nuts and washers. (c) Lift the engine with transmission out of the vehicle slowly and carefully. HINT: Make sure the engine is clear of all wiring and hoses. 34. PLACE ENGINE ON TO ENGINE STAND 35. (A/T) REMOVE A/T OIL COOLER PIPES 36. REMOVE TRANSMISSION 37. (7M-GE) REMOVE CLUTCH COVER AND DISC (See page CL-11)