STEERING — Power Steering (Gear Housing) SR-69 ASSEMBLY OF GEAR HOUSING (See page SR-61) 1. COAT POWER STEERING FLUID OR GREASE ON FOLLOWING PARTS: [Diagram showing gear housing assembly with indicators for: ← Molybdenum disulphide lithium base grease ○ Power steering fluid] 2. INSTALL CYLINDER HOUSING OIL SEAL AND SPACER (a) Coat a new oil seal lip with power steering fluid. (b) Insert SST into the oil seal and spacer. SST 09631-12020, 09631-22070 (c) Tap in the spacer and oil seal softly. [Diagram showing SST tool installation into cylinder housing] 3. INSTALL RACK (a) Install SST to the rack. HINT: If necessary, scrape the burrs off the rack teeth end and burnish. SST 09631-20102 [Diagram showing rack with SST tool attached]