STEERING — Power Steering (Gear Housing) SR-75 (b) Install the boots. HINT: Be careful not to damage or twist the boots. (c) Install the clamps with the ends facing downward. (d) Install the clips with the ends facing outward. 19. INSTALL TIE ROD ENDS (a) Screw the tie rod ends onto the rack ends until the matchmarks are aligned. (b) After adjusting toe-in, torque the clamp nuts. 20. INSTALL RIGHT AND LEFT TURN PRESSURE TUBES (a) Install new four union seats. (b) Using SST, install and torque the tubes. SST 09633-00020 Torque: Valve housing side 200 kg-cm (14 ft-lb, 20 N-m) Rack housing side 240 kg-cm (17 ft-lb, 24 N-m) HINT: Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).