Grinding Sound in Drive and No Movement After Solenoid Replacement - Low ATF Level

Transmissionbeginner✓ OP Confirmed

Problem

After replacing transmission solenoids, the vehicle had a grinding sound when shifted into Drive and would not move.

Grinding sound when transmission is in DriveNo forward movement in DriveSymptoms appeared immediately after solenoid replacement

Root Cause

Insufficient automatic transmission fluid (ATF) after solenoid replacement. Fluid was lost during the solenoid swap and not adequately refilled.

Confidence

Moderate confidence — Original poster confirmed this resolved the issue

View Original Thread →Posted July 2020 on SupraForums.com