42. INSTALL TRANSMISSION HOUSING Install and torque the six bolts. Torque: 10 mm Bolt 345 kg-cm (25 ft-lb, 34 N·m) 12 mm Bolt 580 kg-cm (42 ft-lb, 57 N·m) 43. INSTALL SPEED SENSOR (a) Coat a new O-ring with ATF and install it to the speed sensor. (b) Install the speed sensor. Install and torque the bolt. Torque: 160 kg-cm (12 ft-lb, 16 N·m) (c) Connect the connector. 44. INSTALL SPEEDOMETER DRIVEN GEAR (a) Coat a new O-ring with ATF and install it to the speedometer driven gear. (b) Install the speedometer driven gear. Install and tor- que the bolt. Torque: 160 kg-cm (12 ft-lb, 16 N·m) 45. INSTALL UNIONS (a) Coat new two O-rings with ATF and install them to each union. (b) Install the front union. Torque: 300 kg-cm (22 ft-lb, 29 N·m) (c) Install the rear union as shown in the figure. Torque: 300 kg-cm (22 ft-lb, 29 N·m)