BO-22 BODY — Moulding COMPONENTS (Cont'd) [Diagram showing various car body components with labels:] Quarter Rear Moulding Coat Hook Speaker Grille Seat Belt Tonneau Cover Retractor Seat Back Striker Cover Deck Trim Rear Cover Quarter Trim Panel Deck Trim Side Panel Quarter Trim Ornament Seat Back Seat Cushion [Small diagrams at bottom showing:] A: Grommet B: Retainer C: Clip ♦Cap ♦ Non-reusable parts BO2651 BO2631 REMOVAL OF FRONT OUTSIDE MOULDING 1. REMOVE RADIATOR GRILLE 2. REMOVE FRONT AND SIDE TURN SIGNAL LAMP 3. REMOVE FRONT FENDER OUTSIDE MOULDING (a) Remove the screw. (b) Using a screwdriver, pry off the outside moulding. HINT: Tape the screwdriver tip before use. INSTALLATION OF FRONT FENDER OUTSIDE MOULDING 1. BEFORE INSTALLING MOULDING, REPLACE CAPS Remove the remaining caps on the clip installation holes of the body, and install new caps. 2. CLEAN MOUNTING SURFACE OF BODY Using cleaner, clean the mounting surface of the body. BO2458