REPLACEMENT OF POWER STEERING FLUID 1. JACK UP FRONT OF VEHICLE AND SUPPORT IT WITH STANDS 2. REMOVE FLUID RETURN HOSE FROM RESERVOIR TANK AND DRAIN FLUID INTO CONTAINER 3. WITH ENGINE IDLING, TURN STEERING WHEEL FROM LOCK TO LOCK WHILE DRAINING FLUID 4. STOP ENGINE 5. FILL RESERVOIR TANK WITH FRESH FLUID Fluid type: ATF DEXRON® II 6. START ENGINE AND RUN IT AT 1,000 RPM After 1 or 2 seconds, fluid will begin to discharge from the return hose. Stop the engine immediately at this time. NOTICE: Take care that some fluid remains left in the reservoir tank. 7. REPEAT STEPS 5 AND 6 FOUR OR FIVE TIMES UNTIL THERE IS NO MORE AIR IN FLUID 8. CONNECT RETURN HOSE TO RESERVOIR TANK 9. BLEED POWER STEERING SYSTEM