EG–30 ENGINE – ENGINE MECHANICAL 2JZ–GTE (c) 2JZ–GTE: Install the timing belt plate with the bolt. Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf) 10mm Hexagon Wrench Adhesive 2. INSTALL IDLER PULLEY (a) Apply adhesive to 2 or 3 threads of the pivot bolt. Adhesive: Part No. 08833–00080, THREE BOND 1344, LOCTITE 242 or equivalent (b) Using a 10 mm hexagon wrench, install the plate washer and pulley with the pivot bolt. Torque: 34 N·m (350 kgf·cm, 25 ft·lbf) (c) Check that the pulley bracket moves smoothly. 2JZ-GE 2JZ-GTE 3. TEMPORARILY INSTALL TIMING BELT NOTICE: The engine should be cold. (a) Using the crankshaft pulley bolt, turn the crankshaft, and align the timing marks on the crankshaft timing pulley and on the oil pump body. (b) Remove any oil or water on the crankshaft timing pulley and idler pulley, and keep them clean. (c) Install the timing belt on the crankshaft timing pulley and idler pulley. HINT (When re–using timing belt): Align the match marks of the crankshaft timing pulley and timing belt, and install the belt with the arrow pointing in the direction of engine revolu- tion. 4. INSTALL TIMING BELT GUIDE Install the guide, facing the cup side outward. 5. INSTALL NO.1 TIMING BELT COVER