11. REMOVE PULSATION DAMPER AND NO. 1 FUEL PIPE 12. REMOVE WATER OUTLET HOUSING (a) Loosen the clamp and disconnect the water by-pass hose. (b) Remove the two bolts and remove the outlet housing. 13. REMOVE INTAKE MANIFOLD Remove the eight bolts and two nuts holding the intake manifold and remove the intake manifold and gasket. 14. REMOVE POWER STEERING PUMP FROM BRACKET (a) Remove the PS pump pulley with the drive belt. (b) Remove the PS pump stay. (c) Remove the PS pump from the bracket. (d) Lay the PS pump to one side without disconnecting the hoses. 15. REMOVE EXHAUST MANIFOLD (a) Remove the five nuts and the two heat insulators. (b) Remove seven nuts and the exhaust manifold. 16. REMOVE TIMING BELT AND CAMSHAFT TIMING PULLEYS (See steps 9 to 13 on page EM-12) 17. REMOVE OIL PRESSURE REGULATOR (a) Remove the two bolts and the timing belt cover stay. (b) Remove the three bolts and the oil pressure regulator and gasket. 18. REMOVE NO. 2 TIMING BELT COVER Remove the three bolts and two nuts and the No. 2 timing belt cover and gasket.