RA-26 REAR AXLE AND SUSPENSION — IRS Type Differential (d) Remove the differential case bearing outer race from the carrier. NOTE: Tag the bearing outer races to show the location for reassembly. 14. REMOVE DRIVE PINION FROM DIFFERENTIAL CARRIER INSPECTION AND REPLACEMENT OF DIFFERENTIAL 1. REPLACE DRIVE PINION REAR BEARING (a) Using SST and a press, pull out the rear bearing from the drive pinion. SST 09950-00020 NOTE: If the drive pinion or ring gear are damaged, replace them as a set. (b) Install the washer on the drive pinion with the chamfered end facing the pinion gear. (c) Using SST and a press, press the reused washer and rear bearing onto the drive pinion. SST 09506-30011 2. REPLACE DRIVE PINION FRONT AND REAR BEARING OUTER RACE (a) Using a hammer and brass bar, drive out the outer race. (b) Using SST, drive in a new outer race. SST 09608-35014 (09608-06020, 09608-06110, 09608-06120) 3. REMOVE SIDE BEARINGS FROM DIFFERENTIAL CASE Using SST, pull the side bearing from the differential case. SST 09950-20016