
(e) Using SST, press the outer and inner bushings into the arm.
SST 09710-22041 (09751-02050, 09751-02060)
NOTE: Do not allow grease or oil to get on the bushings.
INSTALLATION OF REAR SUSPENSION ARM
1. INSTALL ARM
(a) Align the complete mark at the same position it was before removal.
(b) Provisionally tighten the suspension arm.
2. INSTALL COIL SPRING
3. INSTALL SHOCK ABSORBER
4. INSTALL BACKING PLATE OR DUST COVER
5. CONNECT BRAKE LINE
6. CONNECT PARKING BRAKE CABLE
7. INSTALL REAR AXLE SHAFT
8. INSTALL BRAKE DRUM OR DISC ROTOR
9. CONNECT REAR DRIVE SHAFT
10. CONNECT STABILIZER BAR TO LOWER ARM