RA/Rear Axle And Suspension, page 49

3. INSTALL STABILIZER BAR BRACKET TO
DIFFERENTIAL SUPPORT MEMBER

Rear Suspension Arm
(See page RA-44)

REMOVAL OF REAR SUSPENSION ARM

1. DISCONNECT STABILIZER BAR FROM LOWER ARM

2. DISCONNECT REAR DRIVE SHAFT

3. REMOVE REAR AXLE SHAFT FLANGE

4. REMOVE BRAKE DRUM OR DISC ROTOR

5. REMOVE REAR AXLE SHAFT

6. REMOVE BACKING PLATE OR DUST COVER

7. DISCONNECT BRAKE LINE

8. DISCONNECT SHOCK ABSORBER FROM LOWER
ARM

9. REMOVE COIL SPRING

10. REMOVE REAR SUSPENSION ARM AND LOWER
CONTROL ARM BUSHING

NOTE: Remember where the complete mark is when
removing the suspension arm.

Mark

(a) Remove the two mounting bolts.

(b) Remove the camber adjusting cam.

(c) Remove the suspension arm.