36. INSTALL OIL STRAINER AND GASKETS (a) Install two new gaskets to the oil strainer. (b) Install and torque the three bolts. Torque: 100 kg-cm (7 ft-lb, 10 N-m) (c) Clamp the solenoid wire. 37. INSTALL MAGNETS IN PAN Install the four magnets in the indentations of the oil pan as shown in the figure. 38. INSTALL OIL PAN (a) Wipe clean all gasket material and be careful not to drop oil on the contacting surfaces of the transmission case and oil pan. (b) Apply seal packing to the oil pan as shown in the figure. Seal packing: Part No. 08826-00090, THREE BOND 1281 or equivalent Seal breadth 2-3 mm (0.08-0.12 in.) (c) Install and torque the nineteen bolts. Torque: 75 kg-cm (65 in.-lb, 7.4 N-m)