AT-144 AUTOMATIC TRANSMISSION — Shift Lock System 3. INSPECT KEY INTERLOCK SOLENOID (a) Disconnect the solenoid connector. (b) Using an ohmmeter, measure the resistance between terminals. Standard resistance: 12 — 17 Ω (c) Apply the battery voltage between terminals. At this time, confirm that a solenoid operation. 4. INSPECT SHIFT LOCK CONTROL SWITCH Inspect that there is continuity between each terminals. [TABLE: Shift Terminal P P₁ P₂ Position P range ○—○ (Release button is not pushed) R, N, D, 2, L ranges ○ ○ ]