
(b) Pull the tank plates outward.
2. REMOVE TANK AND O-RING
(a) Pull the tank upward.
(b) Remove the O-ring.
3. (A/T)
REMOVE OIL COOLER FROM LOWER TANK
(a) 7M-GE
Remove the pipes.
HINT: Make a note of the direction the pipes face.
(b) Remove the nuts, spring washers, plate washers and oil cooler.
(c) Remove the O-rings from the oil cooler.
ASSEMBLY OF RADIATOR
(See page CO-10)
1. INSTALL OIL COOLER TO LOWER TANK
[7M-GE (A/T)]
(a) Clean the O-ring contact surface of the lower tank and oil cooler.
(b) Install new O-rings (1) to the oil cooler (2).
(c) Install the oil cooler (2) with O-rings (1) to the lower tank (3).
(d) Install the plate washers (4), spring washers (5), and nuts (6). Torque the nuts (6).
Torque: 220 kg·cm (16 ft·lb, 22 N·m)