4. REMOVE HUB BEARING INNER RACE Using SST, remove the hub bearing inner race (outside) from the axle hub. SST 09950-20017 5. REMOVE DUST COVER Remove the bolts and dust cover from the steering knuckle. 6. REMOVE OUTER OIL SEAL Using a screwdriver, remove the outer oil seal from the steering knuckle. 7. REMOVE HUB BEARING (a) Using a snap ring pliers, remove the hole snap ring. (b) Temporarily install the hub bearing inner race (outside) to the hub bearing. (c) Using SST, remove the hub bearing from the steering knuckle. SST 09608-35014 (09608-06100)