FI-80 EFI SYSTEM — Fuel System 7M-GE F16668 7M-GTE F16669 7M-GE F42215 7M-GTE F51963 INSTALLATION OF COLD START INJECTOR 1. INSTALL COLD START INJECTOR (7M-GE) Install the cold start injector with a new gasket and the two bolts. Torque: 55 kg·cm (48 in.·lb, 5.4 N·m) (7M-GTE) (a) Connect the cold start injector connector to the cold start injector. (b) Install the cold start injector with a new gasket and the two bolts. Torque: 55 kg·cm (48 in.·lb, 5.4 N·m) 2. CONNECT COLD START INJECTOR TUBE Connect the cold start injector tube to the cold start injector with new gaskets and union bolt. Torque: 180 kg·cm (13 ft·lb, 18 N·m) 3. (7M-GE) CONNECT COLD START INJECTOR CONNECTOR 4. CONNECT CABLE TO NEGATIVE TERMINAL OF BATTERY 5. CHECK FOR FUEL LEAKAGE