SR-60 STEERING — Power Steering (Gear Housing) Matchmarks SR1529 SR1530 SST SR1533 SST SR1531 (CANADA) 1. DISCONNECT UNIVERSAL JOINT (a) Place matchmarks on the universal joint and control valve shaft. (b) Remove the universal joint bolt of the control valve shaft side. (c) Loosen the universal joint bolt of the main shaft side. (d) Pull out the universal joint from the control valve shaft. 2. DISCONNECT TIE ROD ENDS (a) Remove the two cotter pins and nuts. (b) Jack up the lower arm and using SST, disconnect the two tie rod ends. SST 09611-12010 3. (w/o PPS) DISCONNECT AND CONNECT RETURN LINE Using SST, disconnect and connect the return line. SST 09631-22020 Torque: 450 kg-cm (33 ft-lb, 44 N-m) 4. CHECK STEERING WHEEL CENTER POINT 5. CHECK TOE-IN (See page FA-6)