(w/o Anti-lock Brake System) COMPONENTS Cap Strainer Reservoir No. 2 Piston No. 1 Piston Boot Grommet Snap Ring Spring 17.5 [15.2 m, 1.77] Spring Cylinder Body Stopper Bolt 100 [7, 10] Gasket [kg·cm (ft·lb, N·m)] : Specified torque ◆ Non-reusable part BR1161 DISASSEMBLY OF MASTER CYLINDER 1. REMOVE RESERVOIR (a) Remove the set screw and pull out the reservoir. (b) Remove the cap and strainer from the reservoir. 2. REMOVE TWO GROMMETS 3. PLACE CYLINDER IN VISE BR1162 4. REMOVE PISTON STOPPER BOLT Using a screwdriver, push the pistons in all the way and remove the piston stopper bolt and gasket. HINT: Tape the screwdriver tip before use. BR1163