OIL COOLER AND RELIEF VALVE (7M-GTE) COMPONENTS Union Bolt Gasket Oil Filter Bracket Relief Valve O-Ring Relief Valve Plug Spring Gasket Oil Filter No. 1 Oil Cooler Bracket Bracket No. 1 Oil Cooler Hose Gasket No. 2 Oil Cooler Hose Oil Cooler Oil Pipe No. 3 Oil Cooler Hose No. 3 Oil Cooler Hose ◆ Non-reusable part REMOVAL OF OIL FILTER BRACKET 1. DRAIN ENGINE OIL 2. REMOVE NO.4 AIR CLEANER PIPE WITH NO.1 AND NO.2 AIR CLEANER HOSES 3. REMOVE NO.7 AIR CLEANER HOSE (a) Disconnect the air hoses from ISC pipe, air intake connector and PVC pipe. (b) Disconnect the air flow meter connector. (c) Loosen the two clamps and unlock the air cleaner case clip. (d) Remove the bolt and No.7 air cleaner hose. (e) Disconnect the PS idle up air hose.